Shop
-
Vulcathene 92.5 deg Equal Sweep Tee – 38mm
£25.49 + VATVulcathene 92.5 deg Equal Sweep Tee ( 38mm )
-
Vulcathene 92.5 deg Equal Sweep Tee – 51mm
£36.72 + VATVulcathene 92.5 deg Equal Sweep Tee ( 51mm )
-
Vulcathene 92.5 deg Loose Nut Sweep Elbow – 38mm
£19.41 + VAT38mm 92.5 loose nut sweep bend
One end has the standard nut an dolive connection whilst the other has a
captive nut for connection to threaded units.
-
Vulcathene 92.5 deg Loose Nut Sweep Elbow – 51mm
£27.50 + VAT51mm 92.5 loose nut sweep bend
One end has the standard nut and olive connection whilst the other has a captive nut for connection to threaded units.
-
Vulcathene W15 F.I. to Pipe Coupler – 38mm
£15.63 + VATVulcathene F.I. to Pipe Coupler
38mm
1 1/2″ BSP female thread
With standard BSP parallel threads the W15 pipe coupler can be screwed directly to M.I. ends of metal or plastic pipes.
The 38mm unit can be screwed to the threaded tail of a waste or drip cup when a pipe connection is required
-
Vulcathene W15 F.I. to Pipe Coupler – 51mm
£20.00 + VATVulcathene F.I. to Pipe Coupler, 51mm, 2″ BSP female thread
With standard BSP parallel threads the W15 pipe coupler can be screwed directly to M.I. ends of metal or plastic pipes.
The 51mm unit can be screwed to the threaded tail of a 51mm waste.
-
Vulcathene W14 M.I. to Pipe Coupler – 38mm
£15.63 + VATVulcathene M.I. to Pipe Coupler
38mm
1 1/2″ Male thread
With standard BSP parallel threads the W14 Pipe Coupler can be screwed direct into the F.I. fittings
of metal or plastic pipes
-
Vulcathene W14 M.I. to Pipe Coupler – 51mm
£20.00 + VATVulcathene M.I. to Pipe Coupler, 51mm, 2″ Male thread
With standard BSP parallel threads the W14 Pipe Coupler can be screwed direct into the F.I. fittings of metal or plastic pipes
-
Vulcathene Groove Cutting Tool ( 51mm )
£86.76 + VATFor 51mm Tube
The vulcathene grooving tool enables a groove of exact depth and width to be
cut in the correct location from the end of the pipe where mechanical olive is located.
-
Vulcathene Groove Cutting Tool ( 38mm )
£81.66 + VATFor 38mm Tube
The vulcathene grooving tool enables a groove of exact depth and width to be
cut in the correct location from the end of the pipe where mechanical olive is located.
-
Vulcathene Spanner – 38mm
£24.76 + VATFor 38mm Fittings
This moulded polycarbonate spanner is made specifically for use with the Vulcathene Mechanical range and should always be used to tighten the Vulcathene nuts as it will not distort or damage the nuts in the process of achieving a secure joint
-
Vulcathene Spanner – 51mm
£31.95 + VATFor 51mm Fittings
This moulded polycarbonate spanner is made specifically for use with the Vulcathene Mechanical range and should always be used to tighten the Vulcathene nuts as it will not distort or damage the nuts in the process of achieving a secure joint
-
Vulcathene Flexible Drain Hose – 38mm
Price range: £154.12 through £175.72 + VATStandard 38mm flexible drain connectors manufactured from polypropylene
The ends are pre-grooved with nut and olive supplied
Lengths 1000mm, 1500mm and 2000mm
-
Arboles Mixer Lab Tap with Swivel Swanneck
£134.26 + VATMixer Lab Tap with Swivel Swanneck
Removable Serrated Nozzle
-
Arboles Mixer Lab Tap with Swivel Swanneck
£131.53 + VATMixer Lab Tap with Swivel Swanneck
Removable Aerator Nozzle ( This has an M22 thread when the aerator nozzle is removed )
-
Arboles Mixer Lab Tap with Swivel Swanneck Wrist Action Levers
£207.47 + VATMixer Lab Tap with Swivel Swanneck
Removable Aerator Nozzle ( This has an M22 thread when the aerator nozzle is removed )
-
Arboles Monobloc Mixer Tap with Swanneck
£105.83 + VATMonobloc mixer tap with swanneck
Removable Serrated Nozzle
-
Arboles Pillar Bib Lab Tap Removable Nozzle
£74.53 + VATPillar Bib Lab Tap with Removable Serrated Nozzle
-
Watersaver Single Water Lab Tap, Bench Mounted
£64.14 + VATSingle Water Tap, Bench Mounted – Pillar Bib Tap with cold or hot water outlet
-
Watersaver Single Water Lab Tap, Wrist Action Handle
£70.11 + VATSingle Water Tap, Bench Mounted – Pillar Bib Tap with cold or hot water outlet, Wrist Action Handle
-
Arboles Two Way Lab Bib Tap
£113.99 + VATTwo Way Lab Bib Tap
Fixed Serrated Nozzles
Single Water Connection ( Not Mixer Tap )
-
Arboles Two Way Lab Bib Tap with Removable Nozzles
£118.53 + VATTwo way lab bib tap with removable serrated nozzles. Single water connection ( Not Mixer Tap )
-
Watersaver Double Water Lab Tap, Bench Mounted
£137.21 + VATDouble Water Tap, Bench Mounted – Pillar Bib Tap with two cold or hot water outlets
-
Arboles 3-Way Bib Tap with Fixed Nozzles
£181.26 + VATThree-Way Water Tap, Bench Mounted – Pillar Bib Tap with three water outlets. Single water feed.
-
Arboles 3-Way Bib Tap with Removable Nozzles
£188.08 + VATThree-Way Water Tap, Bench Mounted – Pillar Bib Tap with three water outlets. Single water feed.
-
Watersaver Three-Way Water Lab Tap, Bench Mounted
£180.41 + VATThree-Way Water Tap, Bench Mounted – Pillar Bib Tap with three cold or hot water outlets
-
Swivel swanneck lab tap with two side bib taps
£255.50 + VATThis tap is available for either hot or cold and with the optional extras below:
-
Arboles Removable Tap Nozzle – White
£8.40 + VAT -
Arboles Removable Tap Nozzle – Grey
£8.87 + VAT -
Brownall / Broen Tap Handwheel
£17.75 + VATComplete Brownall handle with ring and button for mounting on headwork (headwork not included)
-
WaterSaver Tap Handwheel
£10.21 + VATMolded nylon hooded style handle for water taps and valves for WaterSaver lab taps.
Handwheel Colour: Green
-
Lab Tap Brass Headworks
£11.80 + VATNote: For standard taps only. Not suitable for blade handled taps or other specialist taps
-
Pipe Interrupter for 3/8″ BSP Female
£52.50 + VAT3/8 inch BSP to 1/2 inch BSP pipe interrupter with permanent atmospheric vent.Back flow preventer to be mounted between the spout and nozzle.
WRAS approved certificate number 1812355
Brownall WRAS Certificate ( PDF )
-
Pipe Interrupter for M19 Female
£52.50 + VATM19 to 1/2 inch BSP pipe interrupter with permanent atmospheric vent.Back flow preventer to be mounted between the spout and nozzle.
WRAS approved certificate number 1812355
Brownall WRAS Certificate ( PDF )
-
Pipe Interruptor
£36.00 + VAT1/2 inch BSP pipe interruptor with permanent atmospheric vent.Back flow preventer to be mounted between the spout and nozzle.
WRAS approved certificate number 1812355
Brownall WRAS Certificate ( PDF )
-
Arboles Anti-Siphon Nozzle
£67.95 + VAT900100 WRAS Certificate (PDF )
Anti-Siphon Nozzle for use on laboratory taps
Optimum flow and pressure to operate correctly: 15 litres / min @ 20psi
Select taps with removable nozzle
AUK 3 category 5 Approved
WRAS Approval Number 1601026
-
Table Mount Single Eye Wash
£225.00 + VATTable Mount Single Eye Wash
Table mounted eye shower with a single 45° head, incl. 1.5m inlet hose.
Trigger operated including a built-in check valve and FLOWFIX for regulation of water flow (7 l/min).
-
Table Mount Double Eye Wash
£251.00 + VATTable mounted eye shower with a two 45° angled heads, incl. 1.5m inlet hose.
Trigger operated including a built-in check valve and FLOWFIX for regulation of water flow (14 l/min).
-
Wall Mount Single Eye Wash
£225.00 + VATWall Mount Single Eye Wash
Wall mounted eye shower with a single 45° head, incl. 1.5m inlet hose.
Trigger operated including a built-in check valve and FLOWFIX for regulation of water flow (7 l/min)
