Shop
-
Watersaver Double Water Lab Tap, Bench Mounted
£137.21 + VATDouble Water Tap, Bench Mounted – Pillar Bib Tap with two cold or hot water outlets
-
Brownall Mixer Tap with Wrist Action Levers
£217.30 + VATThis tap is supplied with aerator nozzle but the following alternatives are available if required:
-
Vulcathene Circular Drip Cup
£24.29 + VATVulcathene Circular Drip Cup ( 1 -1/2″ BSP Connection )
Diameter 102mm
Height 136mm
-
Brownall Fixed Swanneck Hot Water Tap
£81.23 + VATThis tap is available with the following optional extras:
-
Tin of Solvent Weld
£29.25 + VAT -
Brownall Double Pillar Angle Water Tap
£124.54 + VATThis tap is available for either hot or cold and with the optional extras below:
-
110mm PVC Volume Control Damper (Beck)
£101.10 + VATPVC Volume Control Damper by BECK for Industrial Applications
- Internal Diameter: 110mm
- Colour: Grey
- See below for other sizes relevant to drawing
-
Arboles Monobloc Mixer Tap with Swanneck
£100.26 + VATMonobloc mixer tap with swanneck
Removable Serrated Nozzle
-
WaterSaver Lift & Turn Handle
£8.87 + VATMolded nylon lift & turn handle for BT2920 gas tap models.
-
Broen-Lab Two Way Lift & Turn Gas Tap – Wall / Panel Mount
£72.26 + VATBROEN-LAB two way lift & turn gas tap, wall / panel mounted
-
Arboles Fixed Swanneck Lab Tap ( Left Hand ) HW
£62.96 + VATFixed Swanneck Lab Tap ( Left Hand ) HW
Hot Water
Left Hand Valve
Fixed Serrated Nozzle
-
Polypropylene Lab Sink 552 x 400 x 237
£82.00 + VATHigh Quality Polypropylene Sink
552mm x 400mm x 237mmTemperature range: 0-80°C
Standard colour: Black Injection moulded from polypropylene copolymer resin, with a self-draining base.
This square PP sink blends well into any laboratory workbench.
Extremely durable.
Delivery 5 – 10 days
-
Arboles Pillar Bib Lab Tap Removable Nozzle
£70.60 + VATPillar Bib Lab Tap with Removable Serrated Nozzle
-
WaterSaver Tap Handwheel
£10.21 + VATMolded nylon hooded style handle for water taps and valves for WaterSaver lab taps.
Handwheel Colour: Green
-
Watersaver Brass Headworks BT Series
£15.39 + VATWatersaver Brass Headworks BT Series
Note: For standard taps only. Not suitable for blade handled taps or other specialist taps
-
Epoxy Resin Drop on Sink – SS6-DO
£164.00 + VATDrop-on sinks are designed to be easily fitted to any type of worktop material.
They have self-rimming flanges which will conceal the core layer of a laminated worktop.
The sink is self-supporting on its integral flange and can be bonded in place with silicone sealant or Epoxy Resin grout.
The same raised flange has a smooth 45 face to the outside that will allow the user to wash liquids over it but prevent accidental spillage of materials into the sink.
The base of the sink slopes to a hole rebated to accept a waste fitting. Sinks can also be drilled to accept an overflow fitting.
-
Brownall Mixer Tap
£182.19 + VATThis tap is supplied with aerator nozzle but the following alternatives are available if required:
-
Brownall / Broen Fixed Serrated Nozzle 3/8″
£5.40 + VATBrownall polypropylene anti-splash serrated hose end for water.
For Brownall / Broen pillar bib taps.
G3/8″ male fitting.
-
Epoxy Resin Drop on Sink – SM8-DO
£188.00 + VATDrop-on sinks are designed to be easily fitted to any type of worktop material.
They have self-rimming flanges which will conceal the core layer of a laminated worktop.
The sink is self-supporting on its integral flange and can be bonded in place with silicone sealant or Epoxy Resin grout.
The same raised flange has a smooth 45 face to the outside that will allow the user to wash liquids over it but prevent accidental spillage of materials into the sink.
The base of the sink slopes to a hole rebated to accept a waste fitting. Sinks can also be drilled to accept an overflow fitting.
-
Laboratory Scaffolding S-Connector
£22.95 + VATScaffold clamp suitable for 1/2″ rod.
Suitable for installation in fume cupboards and laboratory frames.
316 Grade Stainless Steel.
Manufactured in UK -
Fireclay Lab Sink 360mm x 280mm x 150mm
£138.60 + VATGlazed Laboratory Sink 360mm x 280mm x 150mm
Hard wearing, durable, alkali and acid resistant
Fixing clips available
-
Arboles Mixer Lab Tap with Swivel Swanneck
£130.11 + VATMixer Lab Tap with Swivel Swanneck
Removable Serrated Nozzle
-
Arboles Mixer Lab Tap with Swivel Swanneck
£124.60 + VATMixer Lab Tap with Swivel Swanneck
Removable Aerator Nozzle ( This has an M22 thread when the aerator nozzle is removed )
-
Polypropylene Lab Sink 345 x 345 x 235
£68.00 + VATHigh Quality Polypropylene Sink
345mm x 345mm x 235mmTemperature range: 0-80°C
Standard colour: Black Injection moulded from polypropylene copolymer resin, with a self-draining base.
This square PP sink blends well into any laboratory workbench.
Extremely durable.
Delivery 5 – 10 days
-
Watersaver Three-Way Water Lab Tap, Bench Mounted
£180.41 + VATThree-Way Water Tap, Bench Mounted – Pillar Bib Tap with three cold or hot water outlets
-
200mm PVC Drilled Flange Socket
£24.28 + VAT- Internal Diameter: 200mm
- Colour: Grey
- See other sizes relevant to drawing below
-
Arboles Two Way Lab Bib Tap
£107.99 + VATTwo Way Lab Bib Tap
Fixed Serrated Nozzles
Single Water Connection ( Not Mixer Tap )
-
Arboles Fixed Swanneck Lab Tap ( Left Hand ) HW
£67.47 + VATFixed Swanneck Lab Tap ( Left Hand ) HW
Hot Water
Left Hand Valve
Removable Serrated Nozzle
-
Brownall Monobloc Mixer Tap with Wrist Action Levers
£166.56 + VATThis tap is available with the following optional extra:
-
Laboratory Scaffold Boss
£18.95 + VATScaffold boss suitable for 1/2″ scaffold rod.
Machined from 316 grade stainless steel.
Made in the UK. -
Epoxy Resin Drop on Sink – SEL16-DO
£274.40 + VATDrop-on sinks are designed to be easily fitted to any type of worktop material.
They have self-rimming flanges which will conceal the core layer of a laminated worktop.
The sink is self-supporting on its integral flange and can be bonded in place with silicone sealant or Epoxy Resin grout.
The same raised flange has a smooth 45 face to the outside that will allow the user to wash liquids over it but prevent accidental spillage of materials into the sink.
The base of the sink slopes to a hole rebated to accept a waste fitting. Sinks can also be drilled to accept an overflow fitting.
-
Polypropylene Lab Sink 807 x 469 x 330
£231.50 + VATHigh Quality Polypropylene Sink
807mm x 469m x 330mm
Temperature range: 0-80°C
Standard colour: Black Injection moulded from polypropylene copolymer resin, with a self-draining base.
This square PP sink blends well into any laboratory workbench.
Extremely durable.
-
200mm PVC 90 Deg Elbow
£44.77 + VAT- Internal Diameter: 200mm
- Colour: Grey
- See below for other sizes relevant to drawing
-
Fireclay Lab Sink 585mm x 380mm x 230mm
£201.00 + VATGlazed Laboratory Sink 585mm x 380mm x 230mm
Hard wearing, durable, alkali and acid resistant
Fixing clips available
