Centurion Mobile Fume Cabinet
Designed, manufactured and installed to meet the requirements of
Building Bulletin 88
( Rev to Design Note 29 ).
Framework fabricated from powder coated mild steel.
Solid Grade Laminate ( TRESPA ) work base
Optional work surfaces available including polypropylene or solid
6mm polycarbonate sash front visor.
6mm toughened glass side and rear vision panels.
55W low energy light fitting and light switch
RCD Protected Double Socket
Low Airflow Alarm Panel
Fume Cupboard Support
The fume cupboard is mounted on a powder coated mild steel
mobile storage cupboard, which houses the fan and filter unit.
Easy access for filter replacement.
Tri-Layered carbon filters suitable for schools science laboratory
Other filters available on request
Pre Filter Protection
Fume Cupboard Services
Cold Water Outlet into 100 diameter vulcathene drip cup complete
with waste trap.
13Amp Double Electrical Socket.
Service control valves are located at the front of the support frame or
The gas and water supply hoses come complete with flexible supply
and waste hoses. ( 2 metres in length ) with quick release
Stainless steel restraining cable
Docking Station ( Optional )
Robust epoxy coated mild steel lockable enclosure housing all service
connections for our Centurion ductless fume cupboard.
The station can be fitted surface mounted or flush into a carcass e.g.
Note: Special attention must be made when positioning the docking
station. The drainage must be lower than the exit drainage from the
fume cupboard, in order for waste to drain away efficiently.
Gas and water quick release valves are male and female so service
hoses cannot be incorrectly connected.
1 x electrical socket for power supply to fume cupboard
1 x 38mm vulcathene drain connection with cover when not in use.
1 x quick release female gas valve – 1/4” BSP threaded connection
1 x quick release male cold water valve – 1/4” BSP threaded
1 x lockable door
All services clearly labelled
All cabinets are manufactured from zintec mild steel with a textured
powder coated paint for added protection.
Side and back viewing panels are all 6mm toughened safety glass.
Average Face Velocity > 0.4m/sec
Noise Level <50dB
Power Supply 230V