Shop
-
110mm PVC Pipe – 6m
£85.50 + VAT- 6 metre length PVC pipe
- Outside Diameter: 110mm
- Wall thickness: 1.8mm
- Colour: Grey
-
Stainless Steel Sink S38SR – 572 X 419 X 200 mm
£474.00 + VAT316 grade stainless steel offers excellent acid and chemical resistance.
This model is designed to be inset into the worksurface, undermounted versions available.
Supplied with sound deadening pads and integral earth tag
Available without overflow on request
-
200mm PVC End Cap
£33.03 + VAT- Internal Diameter: 200mm
- Wall width: 25mm
- Wall thickness: 3mm
- Colour: Grey
-
355mm PVC Pipe – 6m
£440.68 + VAT- 6 metre length PVC pipe
- Outside Diameter: 355mm
- Wall thickness: 2.8mm
- Colour: Grey
-
Arboles Special Water Pillar Tap
£199.54 + VATArboles Special Water Pillar Tap
Designed for usage with special waters such as Deionised, Distilled, Reverse Osmosis.
Please note when ordering which water indices required.
-
Epoxy Resin Underslung Sink – SVS3
£122.40 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Table Mount Double Eye Wash
£250.87 + VATTable mounted eye shower with a two 45° angled heads, incl. 1.5m inlet hose.
Trigger operated including a built-in check valve and FLOWFIX for regulation of water flow (14 l/min).
-
110mm PVC 45 Deg Elbow
£20.67 + VAT- Internal Diameter: 110mm
- Colour: Grey
- See below for other sizes relevant to drawing
-
315mm PVC Socket
£43.33 + VAT- Internal Diameter: 315mm
- Colour: Grey
- See below for other sizes relevant to drawing
-
200mm PVC Volume Control Damper (Hoka)
£98.24 + VATPVC Volume Control Damper by HOKA for Industrial Applications
- Internal Diameter: 200mm
- Colour: Grey
- See below for other sizes relevant to drawing
-
160mm PVC Drilled Flange Socket
£21.23 + VAT- Internal Diameter: 160mm
- Colour: Grey
- See other sizes relevant to drawing below
-
Watersaver Mixer Lab Tap, Wall/Panel Mounted, Wrist Blade Handles
£172.32 + VATMixer Tap, Bench Mounted, Wrist Blade Handles
-
Arboles 3-Way Bib Tap with Removable Nozzles
£178.17 + VATThree-Way Water Tap, Bench Mounted – Pillar Bib Tap with three water outlets. Single water feed.
-
Acid Storage – 609H x 457W x 457D
£218.92 + VATAcid Storage
609mm (Height) X 457mm (Width) X 457mm (Depth)
White polyester powder coated acid storage cabinet
Single door, double point locking, adjustable shelf, 50mm sump, warning labels
-
Vulcathene Groove Cutting Tool ( 51mm )
£86.76 + VATFor 51mm Tube
The vulcathene grooving tool enables a groove of exact depth and width to be
cut in the correct location from the end of the pipe where mechanical olive is located.
-
Epoxy Resin Sink with Double Drainer DD1500-X
£922.40 + VATA range of single bowl double drainer epoxy resin sink tops that achieve levels of performance and ergonomic efficiency through being moulded as completely homogeneous seamless units.
Sinktops include an integrally moulded central sink with sloping drainers to each side and moulded edging all round.
A flat area is provided to the rear of the sink on which to mount any taps required.
It is possible to cut and re-edge the sink-units to give a reduced length and depth.
-
Epoxy Resin Multi fit Sink – M7
£154.40 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Flammable Storage – 762H x 457W x 457D
£175.68 + VAT762mm (Height) X 457mm (Width) X 457mm (Depth)
Yellow polyester powder coated flammables storage cabinet
Single door, double point locking, adjustable shelf, 50mm sump, warning labels
-
315mm PVC 45 Deg Elbow
£64.18 + VAT- Internal Diameter: 315mm
- Colour: Grey
- See below for other sizes relevant to drawing
-
250mm PVC Pipe – 6m
£277.99 + VAT- 6 metre length PVC pipe
- Outside Diameter: 250mm
- Wall thickness: 2.5mm
- Colour: Grey
-
Arboles Two Way Lab Bib Tap with Removable Nozzles
£112.29 + VATTwo way lab bib tap with removable serrated nozzles. Single water connection ( Not Mixer Tap )
-
Epoxy Resin Sink with Double Drainer DD1350
£840.80 + VATA range of single bowl double drainer epoxy resin sink tops that achieve levels of performance and ergonomic efficiency through being moulded as completely homogeneous seamless units.
Sinktops include an integrally moulded central sink with sloping drainers to each side and moulded edging all round.
A flat area is provided to the rear of the sink on which to mount any taps required.
It is possible to cut and re-edge the sink-units to give a reduced length and depth.
-
Epoxy Resin Multi fit Sink – S50
£248.80 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Epoxy Resin Underslung Sink – SKL7
£188.00 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Floor Mounted Drench Shower
£959.45 + VATFloor mounted drench shower
Shower/eye wash stay open valves ABS shower head and bowl
-
Flammable Storage – 609H x 457W x 457D
£180.93 + VATFlammable Storage
609mm (Height) X 457mm (Width) X 457mm (Depth)
Yellow polyester powder coated flammables storage cabinet
Single door, double point locking, adjustable shelf, 50mm sump, warning labels
-
Acid Storage – 915H x 457W x 457D
£231.32 + VATAcid Storage
915mm (Height) X 457mm (Width) X 457mm (Depth)
White polyester powder coated acid storage cabinet
Single door, double point locking, adjustable shelf, 50mm sump, warning labels
-
Flammable Storage – 915H x 457W x 457D
£188.78 + VATFlammable Storage
915mm (Height) X 457mm (Width) X 457mm (Depth)
Yellow polyester powder coated flammables storage cabinet
Single door, double point locking, adjustable shelf, 50mm sump, warning labels
-
Vulcathene Large Glass Dilution Recovery Trap
£590.38 + VATVulcathene Large Glass Recovery Trap
Capacity 4.5 Litres
-
Broen-Lab Fume Cupboard Burning Gas Set
£235.43 + VATSet comprises of front control valve, 90mm outlet, fixings, stainless steel inlet and outlet hoses.
-
315mm-250mm PVC Reducer
£62.42 + VAT- Internal Diameters: 315mm-250mm
- Colour: Grey
- See below for other sizes relevant to drawing
-
Broen-Lab Swivel Swanneck Hot Water Tap
£92.00 + VATThis tap is available with the following optional extras:
-
Gooseneck, Bench Mounted BT084WSA
£41.86 + VATAvailable for the following services:
Water = White & Green
Flammable Gas = White & Yellow
Non Flammable Gases such as CA, N2, AR, O2 etc = White & Blue
Vacuum = White & Grey
Other Combustible Gases = White & Red -
Fume Hood 1000mm
£960.00 + VATFume Hood
Powder coated mild steel construction
For bench mounting
200mm extract spigot for connection to an extract system
External Dimensions: 1000mm(Wide) x 700mm(Depth) x 1200mm(Height)
Open front 950mm(Wide) x 945mm(Height)
-
Centrifugal Extract Fan
£965.00 + VATCentrifugal Extract Fan
Including, anti-vibration mountings, flexible inlet and outlet connections and scroll drain outlet
Corrosion Resistant Centrifugal Fan for
Fume cupboards
Fume Hoods
Ventilated Enclosures
-
Wall Outlet
£19.32 + VATStraight Wall Outlet
Fixed serrated nozzle
55mm reach
3/8″ BSP threaded connection
-
Flammable Storage – 915H x 915W x 457D
£280.05 + VATFlammable Storage
915mm (Height) X 915mm (Width) X 457mm (Depth)
Yellow polyester powder coated flammables storage cabinet
Two doors, double point locking, adjustable shelf, 50mm sump, warning labels
-
Flammable Storage – 609H x 609W x 457D
£220.31 + VATFlammable Storage
609mm (Height) X 609mm (Width) X 457mm (Depth)
Yellow polyester powder coated flammables storage cabinet
Single door, double point locking, adjustable shelf, 50mm sump, warning labels
-
TEL AFA1000/2/mk3 Fume Cupboard Alarm
£500.00 + VATThe AFA1000/2/MK3 from Temperature Electronics Ltd. is an advanced airflow monitoring and control system designed for industrial and educational fume cupboards and biological safety cabinets. Featuring a precise hot wire sensor and an LCD display, it offers stable, long-term performance with intuitive two-step calibration.
This kit includes:
- TEL AFA1000/2 Airflow Monitor and Alarm
- 15V UK Power Supply
- Hotwire Airflow Sensor
- Airflow Sensor Data Cable
-
Broen-Lab Fume Cupboard Vacuum Set
£158.88 + VATSet comprises of front control valve, 90mm outlet, fixings, inlet and outlet hoses.
-
Laboratory Scaffold Rod (690mm)
£13.80 + VAT316 Stainless Steel Scaffold Rod 690mm
Suitable for 1m wide fume cupboards.
