Shop

Filter
  • Vulcathene Flexi Hose 38mmSKU:

    Vulcathene Flexible Drain Hose

     £154.12 – £175.72 + VAT

    Standard 38mm flexible drain connectors manufactured from polypropylene

    The ends are pre-grooved with nut and olive supplied

    Lengths 1000mm, 1500mm and 2000mm

  • BROEN-LAB Lift and Turn Gas Tap 25995778210-10SKU: 25995778210-14

    Broen-Lab Two Way Straight Lift & Turn Gas Tap

     £68.68 + VAT

    BROEN-LAB two way 180 degree lift & turn gas tap

  • Belfast Sink SB-05SKU: SB-07

    Belfast Lab Sink 595mm x 460mm x 250mm

     £172.50 + VAT

    Enamel Glazed Laboratory Sink 595mm x 460mm x 250mm

    Integral Overflow

    Hard wearing, durable, alkali  and acid resistant

    View Fireclay and Belfast Sink Dimensions

  • Brownall Fixed Swanneck CW Tap Wrist Action LeversSKU: XL340568201-14

    Brownall Fixed Swanneck CW Tap Wrist Action Levers

     £95.33 + VAT

    This tap is available with the following optional extras:

  • XL3317010XX-09 Brownall Special WaterSKU: XL3317010XX-09

    Brownall Special Water Pillar Tap

     £176.30 + VAT

    Pillar angle fitting with 10 x 1,5 mm OD LLDPE (Linear Low-Density Polyethylene) tube protected by a brass pipe.

  • Single Sided Single Gang PED BoxSKU: SS1-W

    Single Sided – Single Gang Pedestal Box

     £13.34 + VAT

    Pedestal boxes finished in high gloss white.

  • Glass Dilution recovery Trap W691SKU: W691

    Vulcathene Large Glass Dilution Trap

     £371.96 + VAT

    Vulcathene Glass Dilution Recovery Trap ( 1 -1/2″ BSP Connection )

    Volume 2.3 litres

  • Brownall Monobloc Mixer TapSKU: XL360398239-52H

    Brownall Monobloc Mixer Tap

     £141.45 + VAT

    This tap is available with the following optional extra:

  • small larch enamel lab sinkSKU: SU-02

    Fireclay Lab Sink 330mm x 330mm x 180mm

     £142.00 + VAT

    Enamel Glazed Laboratory Sink 330mm x 330mm x 180mm

    Hard wearing, durable, alkali  and acid resistant

    Fixing clips available

    View Fireclay and Belfast Sink Dimensions

  • Broen-Lab mixer tapSKU: 25361718239-14

    Broen-Lab Mixer Tap with Wrist Action Levers

     £189.63 + VAT

    This tap is supplied with aerator nozzle but the following alternatives are available if required:

     

  • Watersaver Swivel Single Hot Water Lab Tap, Wrist Blade HandleSKU: BT614BH-LH

    Watersaver Swivel Single Hot Water Lab Tap, Wrist Blade Handle

     £75.03 + VAT

     

    Single Water Tap, Bench Mounted

    BT614BH Specification Drawing

  • Bench Mounted EyewashSKU: MOD3120

    Bench Mounted Eye Wash

     £233.90 + VAT

    Bench mounted eye wash

    Movable laboratory emergency spray deck-mounting single head

  • XL340088202-14SKU: XL340088201-14

    Brownall Swivel Swanneck Cold Water Tap

     £81.23 + VAT

    This tap is available with the following optional extras:

  • SM8 Epoxy Resin Lab SinkSKU: SM8

    Epoxy Resin Underslung Sink – SM8

     £188.00 + VAT

    A standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.

    An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.

    The base of the sink slopes to a hole rebated to accept a waste fitting.

    Sinks can also be drilled to accept an overflow fitting.

  • vulcathene spanner W36SKU: W361

    Vulcathene Spanner

     £24.76 + VAT

    For 38mm Fittings

    This moulded polycarbonate spanner is made specifically for use with the Vulcathene Mechanical range and should always be used to tighten the Vulcathene nuts as it will not distort or damage the nuts in the process of achieving a secure joint

  • Vulcathene Cutting ToolSKU: W261

    Vulcathene Groove Cutting Tool ( 38mm )

     £81.66 + VAT

    For 38mm Tube

    The vulcathene grooving tool enables a groove of exact depth and width to be

    cut in the correct location from the end of the pipe where mechanical olive is located.

  • Broen wall mount double shower 27100091003011SKU: 27100091003011

    Wall Mount Double Eye Wash

     £250.87 + VAT

    Wall mounted double eye wash

    Wall mounted eye shower with a two 45° angled heads, incl. 1.5m inlet hose.

    Trigger operated including a built-in check valve and FLOWFIX for regulation of water flow (14 l/min).

  • Brownall Fixed Swanneck HW Tap Wrist Action LeversSKU: XL340578202-14

    Brownall Fixed Swanneck HW Tap Wrist Action Levers

     £95.33 + VAT

    This tap is available with the following optional extras:

  • W151 Pipe CouplerSKU: W151

    Vulcathene W15 F.I. to Pipe Coupler

     £15.63 + VAT

    Vulcathene  F.I. to Pipe Coupler

    38mm

    1 1/2″ BSP female thread

    With standard BSP parallel threads the W15 pipe coupler can be screwed directly to M.I. ends of metal or plastic pipes.

    The 38mm unit can be screwed to the threaded tail of  a waste or drip cup when a pipe connection is required

  • Epoxy Resin Lab Sink Drop OnSKU: SGL10-DO

    Epoxy Resin Drop on Sink – SGL10-DO

     £226.40 + VAT

    Drop-on sinks are designed to be easily fitted to any type of worktop material.

    They have self-rimming flanges which will conceal the core layer of a laminated worktop.

    The sink is self-supporting on its integral flange and can be bonded in place with silicone sealant or Epoxy Resin grout.

    The same raised flange has a smooth 45 face to the outside that will allow the user to wash liquids over it but prevent accidental spillage of materials into the sink.

    The base of the sink slopes to a hole rebated to accept a waste fitting. Sinks can also be drilled to accept an overflow fitting.

  • Broen table mount single shower 27100031005011SKU: 27100031005011

    Table Mount Single Eye Wash

     £224.99 + VAT

    Table Mount Single Eye Wash

    Table mounted eye shower with a single 45° head, incl. 1.5m inlet hose.

    Trigger operated including a built-in check valve and FLOWFIX for regulation of water flow (7 l/min).

    View PDF Data Sheet

  • PVC SocketSKU: 200SOCKET

    200mm PVC Socket

     £23.66 + VAT
    • Internal Diameter: 200mm
    • Colour: Grey
    • See below for other sizes relevant to drawing
  • Fixed Swanneck OutletSKU: 800711

    Fixed Swanneck Outlet

     £28.35 + VAT

    Fixed swan neck cold water outlet with fixed serrated nozzle

    All brass construction

    Plastic coated ( Rilsan )

    Standard colour Light Grey

    3/8″ BSP x 60mm flat ended brass shank with backnut

    Overall height 280mm

    Height from tip of outlet to bench 200mm

  • Vulcathene Drip Cup 497SKU: 497

    Vulcathene Small Oval Drip Cup

     £37.40 + VAT

    Vulcathene Small Oval Drip Cup ( 1 -1/2″ BSP Connection )

    Length 178mm x Width 102mm

    Height 216mm

  • PVC 90degSKU: 160_90DEG

    160mm PVC 90 Deg Elbow

     £36.31 + VAT
    • Internal Diameter: 160mm
    • Colour: Grey
    • See below for other sizes relevant to drawing
  • PVC PipeSKU: 200PIPE

    200mm PVC Pipe – 6m

     £209.53 + VAT
    • 6 metre length PVC pipe
    • Outside Diameter:  200mm
    • Wall thickness:  2.5mm
    • Colour: Grey
  • Epoxy Resin Lab SInkSKU: SR12DI

    Epoxy Resin Underslung Sink – SR12DI

     £237.60 + VAT

    A standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.

    An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.

    The base of the sink slopes to a hole rebated to accept a waste fitting.

    Sinks can also be drilled to accept an overflow fitting.

  • Vulcathene Large Oval drip Cup 499BSKU: 499B

    Vulcathene Large Oval Drip Cup

     £40.78 + VAT

    Vulcathene Large Oval Drip Cup ( 1 -1/2″ BSP Connection )

    Length 264mm x Width 111mm

    Height 225mm

  • PVC 45 degSKU: 200_45DEG

    200mm PVC 45 Deg Elbow

     £30.42 + VAT
    • Internal Diameter: 200mm
    • Colour: Grey
    • See below for other sizes relevant to drawing
  • Broen-Lab fixed HW lab tapSKU: 25340118202-14

    Broen-Lab Fixed Hot Water Tap

     £81.23 + VAT

    This tap is available with the following optional extras:

  • Stainless Steel Sink and DrainerSKU: FP10012/13

    S/S Inset Sink & Drainer FP10012/13 965 X 525mm

     £629.10 + VAT

    316 grade stainless steel offers excellent acid and chemical resistance.

    Supplied with sound deadening pads and integral earth tag

    Available without overflow on request

  • Epoxy Resin Lab Sink Drop OnSKU: SDS5-DO

    Epoxy Resin Drop on Sink – SDS5-DO

     £122.40 + VAT

    Drop-on sinks are designed to be easily fitted to any type of worktop material.

    They have self-rimming flanges which will conceal the core layer of a laminated worktop.

    The sink is self-supporting on its integral flange and can be bonded in place with silicone sealant or Epoxy Resin grout.

    The same raised flange has a smooth 45 face to the outside that will allow the user to wash liquids over it but prevent accidental spillage of materials into the sink.

    The base of the sink slopes to a hole rebated to accept a waste fitting. Sinks can also be drilled to accept an overflow fitting.

  • Epoxy Resin Underslung Sink - SGR11SKU: SGR11

    Epoxy Resin Underslung Sink – SGR11

     £255.20 + VAT

    A standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.

    An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.

    The base of the sink slopes to a hole rebated to accept a waste fitting.

  • Vulcathene 92.5 deg Loose Nut Sweep Elbow ( 38mm )SKU: W291

    Vulcathene 92.5 deg Loose Nut Sweep Elbow ( 38mm )

     £19.41 + VAT

    38mm 92.5 loose nut sweep bend

    One end has the standard nut an dolive connection whilst the other has a

    captive nut for connection to threaded units.

  • Epoxy Resin Lab Sink with DrainerSKU: SD1000

    Epoxy Resin Sink with Drainer SD1000

     £727.20 + VAT

    Single bowl single drainer sink tops feature a worktop, sink and drainer which is moulded  in one section and as such is totally seamless.

    Sink tops incorporate a ribbed drainer area which slopes to an integrally moulded sink bowl.

    This single drainer unit is cast oversize and then cut to the required size, from a minimum of 900mm x 600mm up to a maximum of 1000mm x 850mm.

    They are then fitted with edging from ours standard range to make up the required configuration.

  • Emergency ShowerSKU: MOD3000

    Wall Mounted Eye Wash

     £241.02 + VAT

    Wall mounted eye wash

    Emergency spray unit single head

    For use in industry, laboratories and universities

  • Broen wall mount single shower 27100031003011SKU: 27100031003011

    Wall Mount Single Eye Wash

     £224.99 + VAT

    Wall Mount Single Eye Wash

    Wall mounted eye shower with a single 45° head, incl. 1.5m inlet hose.

    Trigger operated including a built-in check valve and FLOWFIX for regulation of water flow (7 l/min)

  • PVC ReducerSKU: 200_160RED

    200mm-160mm PVC Reducer

     £39.06 + VAT
    • Internal Diameters:  200mm-160mm
    • Colour: Grey
    • See below for other sizes relevant to drawing
  • Fume Cupboard Control ValveSKU: BT753WSA

    Fume Cupboard Valve, Straight Face, BT753

     £42.98 + VAT

    WaterSaver Front Control Valve BT753 available for the following media:

    BT753W water valve construction with compression valve cartridge = £42.98 + VAT

    BT753N-AIR Needle valve construction, Non Burn = £42.98 + VAT

    BT753N-VAC Needle valve construction, Vacuum = £42.98 + VAT

    BT753G Push/turn gas valve construction = £52.08 + VAT

  • Stainless Steel Lab SinkSKU: S27SR

    Stainless Steel Sink S27SR – 546 X 394 X 180 mm

     £305.33 + VAT

    316 grade stainless steel offers excellent acid and chemical resistance.

    This model is designed to be inset into the worksurface, undermounted versions available.

    Supplied with sound deadening pads and integral earth tag

    Available without overflow on request

  • Wall Mounted Emergency ShowerSKU: MOD1110

    Wall Mounted Drench Shower

     £327.57 + VAT

    Wall mounted drench shower

    Horizontal drench shower ABS shower head

    Highly visible yellow ABS anti-corrosive plastic coating

  • PVC 90degSKU: 110_90DEG

    110mm PVC 90 Deg Elbow

     £27.88 + VAT
    • Internal Diameter: 110mm
    • Colour: Grey
    • See below for other sizes relevant to drawing
  • Brownall / Broen Aerator NozzleSKU: 25390051001/25390061001

    Brownall / Broen Aerator Nozzle

     £18.45 + VAT

    Aerator nozzle & adapter for water.  M19x1 inlet.

    Fits the Brownall / Broen range of water taps after removing the serrated nozzle.

  • Fume Cupboard Control ValveSKU: BT751

    Fume Cupboard Valve, Straight Face, BT751

     £42.98 + VAT

    WaterSaver Front Control Valve BT751 available for the following media:

    BT751N-AIR Needle valve construction, Non Burn = £42.98 + VAT

    BT751N-VAC Needle valve construction, Vacuum = £42.98 + VAT

    BT751G Push/turn gas valve construction = £52.08 + VAT

    BT751FCN Fine control needle valve construction (cleaned, lubricated and packaged for high purity gas service) = £65.97 + VAT

  • Fume Cupboard Control ValveSKU: BT750

    Fume Cupboard Valve, Straight Face, BT750

     £47.95 + VAT

    WaterSaver Front Control Valve BT750 available for the following media:

    BT750W water valve construction with compression valve cartridge = £47.95 + VAT

    BT750N-AIR Needle valve construction, Non Burn = £47.95 + VAT

    BT750N-VAC Needle valve construction, Vacuum = £47.95 + VAT

    BT750G Push/turn gas valve construction = £57.05 + VAT

    BT750FCN Fine control needle valve construction (cleaned, lubricated and packaged for high purity gas service) = £70.94 + VAT

  • Double Sided Single Gang PED BoxSKU: DS2-W

    Double Sided – Single Gang Pedestal Box

     £19.34 + VAT

    Pedestal boxes finished in high gloss white.

  • Broen Polypropylene Sink 97B0560SKU: 97B0560

    Polypropylene Lab Sink 558 x 355 x 240

     £77.50 + VAT

    High Quality Polypropylene Sink

    558mm x 355mm x 240mm

    Temperature range: 0-80°C

    Standard colour: Black Injection moulded from polypropylene copolymer resin, with a self-draining base.

    This square PP sink blends well into any laboratory workbench.

    Extremely durable.

    Delivery 5 – 10 days

  • PVC 90degSKU: 315_90DEG

    315mm PVC 90 Deg Elbow

     £96.68 + VAT
    • Internal Diameter: 315mm
    • Colour: Grey
    • See below for other sizes relevant to drawing
  • W141 Pipe CouplerSKU: W141

    Vulcathene W14 M.I. to Pipe Coupler

     £15.63 + VAT

    Vulcathene M.I. to Pipe Coupler

    38mm

    1 1/2″ Male thread

    With standard BSP parallel threads the W14 Pipe Coupler can be screwed direct into the F.I. fittings

    of metal or plastic pipes

  • PS4 lab posture stool with small back restSKU: PS4

    Laboratory Posture Stool with small back support

     £102.75 + VAT

    Height adjustment 580-800mm

    Colour: BLACK

Shopping Basket
Scroll to Top